How To Boot Into Dos Windows Xp

How to become to an MS-DOS prompt or Windows command line

Updated: 12/31/2020 by Computer Hope

Below are steps on getting to an MS-DOS prompt or Windows command line in all versions of Microsoft operating systems.

Get to a Command Prompt in Windows 10

1. Click Beginning.
2. Type cmd and press Enter.

Notice

For some commands and options to work in the Windows 10 command line, you must run the command line equally ambassador. To do this, correct-click the cmd icon and select Run as administrator.

Get to a Command Prompt in Windows eight

1. Get to the Commencement screen
2. Type cmd and printing Enter.

- OR -

1. Move the mouse arrow to the very bottom-left corner of the screen and right-click, or printing Windows key+X.
2. In the power user task menu, select either Command Prompt or Control Prompt (Admin).

Get to a Control Prompt in Windows Vista and 7

1. Click Kickoff.
2. Type cmd and press Enter.

Observe

For some commands and options to work in the Windows Vista and 7 command line, yous must run the command line as administrator. To do this, right-click the cmd icon and select Run as administrator.

If you're attempting to get into an MS-DOS prompt to troubleshoot the computer, kick the calculator into Safe Mode.

Get to a Command Prompt in Windows NT, 2000, and XP

1. Click Kickoff.
2. Click Run.
3. Blazon cmd or command and press Enter.

• What is the difference between COMMAND.COM and CMD.EXE?

If you are attempting to become into an MS-DOS prompt to troubleshoot the estimator, kicking the estimator into Safety Mode.

Tip

Windows 2000 and XP users who cannot kick the figurer into Normal Windows fashion or Safe Mode tin can too enter and apply the Recovery Console to manage their reckoner from a prompt. See: How to use the Windows Recovery Panel.

Finally, if you are experiencing issues getting into Windows NT, 2000, or XP, it may be necessary to run troubleshooting steps from an MS-DOS prompt. We recommend the Network Administrator gain access either using a standard MS-DOS kicking diskette or the ERD diskettes created after the installation of Windows NT. Also, they may access MS-DOS by booting from a Windows XP CD.

Get to a Command Prompt in Windows 95, 98, and ME

If you can go into Windows 95, 98 or ME, you tin can get to an MS-DOS prompt by following the steps below.

1. Click Showtime.
2. Click Run.
3. Type control and press Enter.

Following the steps to a higher place opens an MS-DOS shell. However, if you are attempting to troubleshoot an upshot with the computer and are using Microsoft Windows 95 or Windows 98, we suggest you restart the computer into MS-DOS. To do this, follow the steps below.

How to restart the calculator into an MS-DOS prompt

1. Click Start.
2. Click Shutdown.
3. Cull the option to restart the computer to an MS-DOS prompt.

If yous cannot become into Windows 95 or Windows 98 to get to an MS-DOS prompt, follow the instructions beneath (Windows ME does non have this option).

1. Reboot the computer
2. As the computer is booting, press the F8 key when yous hear a beep or when yous see "Starting Windows 95" or "Starting Windows 98." Windows 98 users sometimes may detect it easier to press and concur the left Ctrl key as the figurer is booting.
3. If washed properly, the user should get to a screen similar to the below screen.

Microsoft Windows 95 Startup Menu ============================= one. Normal 2. Logged (\BOOTLOG.TXT) iii. Safety Mode 4. Step-past-footstep confirmation 5. Command prompt simply vi. Condom mode command prompt only Enter a pick: 1 F5=Safe Fashion Shift+F5=Command prompt Shift+F8= Stride-by-footstep confirmation [N]        

4. Select the option for Rubber mode command prompt just.

Getting to MS-DOS

If you lot are running MS-DOS with no other operating systems, the computer should be booting into an MS-DOS prompt automatically, unless you have a shell or other program loading automatically.

If the computer cannot load MS-DOS, reboot the figurer and as the estimator is booting, press the F5 key when you see the message "Starting MS-DOS" or the MS-DOS version. Pressing this key should load the default settings for MS-DOS.

If this opens an MS-DOS prompt and you desire to prevent further occurrences, edit the autoexec.bat or the config.sys files and remark whatever bad lines.

Get to MS-DOS in Windows 3.x

If you are running Windows three.ten, it is likely that the estimator is booting into Windows automatically and bypassing the MS-DOS prompt. If the computer loads successfully into Windows, to get out to an MS-DOS prompt, from the Program Managing director, click the file card and select Exit.

If the reckoner cannot load MS-DOS, reboot the figurer and as the figurer is booting, press the F5 key when y'all see the message "Starting MS-DOS" or the MS-DOS version. Pressing this cardinal should load the default settings for MS-DOS.

If you do not want Windows three.ten to load automatically into Windows three.x, edit the autoexec.bat file and remove the "win" line.

Other operating system

Tip

If you want a command line, y'all more than than likely want to access the Shell or Concluding for your operating arrangement, not MS-DOS.

If you are using another operating system (e.chiliad., OS/two or Linux variant) and you need to get to an MS-DOS prompt, use an MS-DOS boot diskette, unless you lot are dual booting the calculator. Keep in mind that booting from an MS-DOS diskette is not going to allow you to have access to the files used with other operating systems. However, if you lot're erasing everything and starting over, this would allow you to delete all pre-existing information and beginning over.

Source: https://www.computerhope.com/issues/chdos.htm

Posted by: thomaslenct1938.blogspot.com

Share this post